Haycomp Wombat Mobile Hoist
|
Contact the suppliers for pricing and availability
(3 suppliers)For information contact AT Aust on 1300 452 679
Short Description
A mobile, steel framed, battery powered hoist with a tilting frame. A spreader bar is optional. It can be used to lift and transfer persons from a seated or lying position, or to and from the floor. It is available either as a fixed model that cannot be dismantled or as a model that dismantles into four sections for transportation. The hoist has a manually operated base adjustment. Size suitable for domestic use.
Additional Info
More Details
Frame
Epoxy coated, steel
Mast
Single, upright mast. The battery is attached to the lower half of the mast.
Base
U-shaped
Boom
Single with arced angle of lift
Castors
100mm, single and swivel. Rear castors have lockable brakes.
Attachment Points
Located at four positions on the tilting frame for keyhole fittings. Two attachments are located on the optional spreader bar for sling loops.
Controls
Hand held control with push button switches for the vertical movement. Opening of the legs of the base is manually operated with a foot operated lever.
Power Source
24 volt, rechargeable battery that is situated on the lower part of the mast. An audible warning signal is activated during use when the battery is reduced to 50% of capacity.
Battery Recharging
Separate recharger. The battery is removed from the mast and connected to the battery charger at a mains power point.
Portability
One model has a removable pin in the arm of the lifter. This enables the hoist to be dismantled into four components. The mast, boom and tilting frame detach from the base.
Safety Features
Include an automatic cut out switch in the event of the boom encountering any resistance and an emergency stop and lower button on the mast.
Slings
Cradle Full Support Sling:
* Divided leg sling with padded spinal support and keyhole fittings on the straps.
* Top of sling should be level with top of users head
* Tested to 200kg
* Sizes: Small, Medium, Large, Extra Large (Colour coded)
Conventional GP slings:
* Fit standard yoke
* Available in polyester and mesh.
Option Details
The hoist can be supplied with quick release connections to allow easy disassembly for transport in a car.
Place Of Manufacture
SA, Australia
Price Guide
Call supplier for pricing
Price on application from Haycomp
Models And Options
Models
HC15-140C
Wombat Fixed Mobile Hoist with Tilting Frame
HC15-140Y
Wombat Fixed Mobile Hoist with Spreader Bar
HC15-140C-Q
Wombat Mobile Hoist with Tilting Frame - Quick Release
Options
* Quick release connections
Dimensions
| Specification | Standard |
|---|---|
| Base Height (clearance) | 140 mm |
| Base Length | 980 mm |
| Base Width Maximum (int measurement open) | 1040 mm |
| Base Width Minimum (ext measurement closed) | 540 mm |
| Height | Unknown |
| Load Capacity (supplier stated) | 140 kg |
| Spreader Bar Height | Unknown |
| Tilting Frame Height | Unknown |
| Weight of Heaviest Part | Unknown |
Additional Dimensions
Weight (kg) NSW................................... 35 kg
Castor Diameter................................... 100 mm
Requirements
Standards
Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html
TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au
When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.
Suppliers
AIS Healthcare Pty LtdUnits 1 & 2, 21 Stud RdBayswater VIC 3153 Australia Sales: 03 9729 9399 Fax: 03 9720 5776 Contact Person: Paul McKay Email: sales@aishealthcare.com.au Website: http://www.aishealthcare.com.au |
Haycomp (manufacturer)Units 1 & 2, 21 Stud RdBayswater VIC 3153 Australia Sales: 03 9729 9399 Fax: 03 9720 5776 Contact Person: Claudette Lynch Email: sales@haycomp.com.au Website: http://www.haycomp.com.au |
Medical Industries Australia87 Mars RdLane Cove NSW 2066 Australia Sales: 02 9490 6200 Fax: 02 9490 6298 Website: http://www.medind.com.au |
Disclaimer
Whilst all care is taken to provide accurate information with respect to the item described, the Independent Living Centre New South Wales (ILCNSW), operating as Assistive Technology Australia, is not involved in product design or manufacture, and therefore not in a position to guarantee the accuracy of the information provided. Selection of equipment, which is both suitable and appropriate for individual needs remains the responsibility of the person(s) considering requisition, and no responsibility is taken by the ILCNSW (Assistive Technology Australia) for any loss or injury caused through use of the equipment or alleged to have arisen through reliance upon information provided. As information is subject to change any enquiries should be directed to the manufacturer.