More Details

Frame
* Square tubular framework

Headboard / Footboard
* Both the headboard and footboard are standard
* They clamp onto the bed frame and are both removable
* The handset control can be hooked over the headboard

Adjustment and Controls
* Two handsets are provided. One handset operates the standard bed adjustments which includes backrest raise and lower, knee break, leg raise, height adjustment and trendelenburg (forward and reverse tilt). This control features a white face with push buttons with picture symbols for each function.
* The second handset operates the safety cradle and the turning function. It has a black face with numbered touch buttons
* The turning function will not operate until the safety cradle is raised into position
* Programmable turning functions are available
* The first setting can provide one turning motion every six minutes. Ten turning motions complete a full turning cycle. This function completes a full turn cycle in two hours
* The second setting provides a slower cycle providing one turning motion every twelve minutes. This function completes a full turn cycle in two hours
* The side tilt will go up to a maximum of 30 degrees

Mattress
* This bed can be provided with an Ultimate MacMed foam mattress. It consists of three layers of foam and features a vapour permeable cover
* The bed is not designed to be used in combination with air filled alternating mattresses

Castors
* The four castors all feature a foot pedal brake. Each end of the lever is colour coded red or green to ascertain when the castor is locked or unlocked

Bed Rails
* A fold down rail is featured on each side three quarters the length of the bed
* A push button mechanism releases the rail to fold. When lifted up it automatically locks back into place
* The handset controls can be hooked over the safety rail

Safety Feature
* CPR backrest release

Motor
* Linak motors with 24 volt operation are used
* Battery backup is featured

Safety and Maintenance
* Refer to supplier / manufacturer manual and instructions for all safety and maintenance details

Benefits
* The cradle design increases the surface area of contact between the body and the mattress assisting in pressure reduction. The cradle provides stability when the person is turned to the side
* Allows pressure relief with each rotational tilt of the bed
* Reduces manual handling from carer
* Assists with repositioning user for skin inspection, cleaning
* Reduces complications associated with immobility
* Utilises static mattress surfaces that are easily cleaned and maintained

Note
* Legrest raise: bed frame bends at knee area and the foot end of the bed remains elevated
* Knee break: bed frame bends at knee area and the foot end of bed remains low
* Trendelenburg Tilt: allows the entire bed to tilt so a person's feet can be higher than their head. Reverse Trendelenburg tilts the bed in the opposite direction

Considerations

In certain circumstances there is an element of risk involved in the use of a device that attaches to the side of a bed such that there is the possibility of entrapment between the device and the mattress. This includes but is not limited to a bed pole (stick), bed rail or bed rail protector. The device may increase the risk of injury or even death to the bed occupant. Entrapment of limbs or body parts may occur with parts of the bed and the device. Some bed occupants may try to climb over a bed rail to get out of bed.

A risk assessment should be undertaken in each circumstance of use. The device should not be used in circumstances where there is a gap between the vertical components and the mattress. Users most at risk include those with physical or cognitive challenges or where the intended user's alertness is affected by medication.

Regular monitoring is recommended, particularly where the user's condition is changing.

Place Of Manufacture

Minwa Pty Ltd (Vic) Australia

Price Guide

Price is from Access Health
Plus delivery fee if applicable

Models

* Deluxe model - with trendelenburg positioning and CPR function

Options

* IV pole
* Self help pole

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.