More Details

* The cube pad can be adapted for use on backs to support and reduce risk to bony prominence, on gel based cushions to stop bottoming out, and on existing low end cushions to provide increased shear and pressure reduction.
* The overlay is designed to provide maximum pressure protection and adapts to the shape of contoured cushions.
* The grid channels provide ventilation and drainage.
* This pad works better when coupled with foam. On its own it is only suitable for low risk clients. When foam is used in combination with the pad it may be suitable for higher risk clients.
* The material dissipates heat build up, distributes weight uniformly to avoid high pressure development and doesn't bottom out.
* Does not require kneading or readjustment for continuous support.
* Will not leak or flow if punctured.
* Suitable for custom moulded cushions.

Sizes:
Maximum of 609 x 609 mm in 2.54 cm increments
Custom sizes available upon request

Considerations

NOTE: Re: use of an electric blanket / heating pad under the gel pad.

Action Products advised that the heating pad be placed under the pad and pre-warm it. You must be extremely careful that the pad does not get too hot or develop hot spots as this will carry through the Akton pad and the patient could get burned. They should not take it above 103F as this could cause burns to the patient. If the patient has no feeling then someone must check the patient at all times to prevent burns caused by the heating pad. The Action pad merely will transfer the heat as the heating pad produces it.

Follow the manufacturer's directions when using a heating pad / electric blanket.

Place Of Manufacture

USA

Models

One model is available in various sizes - upon request

Options

If a cover is required, please order an Action Shear Smart Pad

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.