More Details

Frame
* Adjustable front suspension

Seat
* Fully adjustable captain style seat
* Vinyl

Upholstery
* Vinyl

Backrest
* Contoured
* Padded

Headrest
* Height adjustable

Armrests
* Flip up armrests

Legrest
* N/A

Footplates
* One piece footplate
* Adjustable
* Flip up

Wheels
* Adjustable Jockey wheels with shock absorbers
* Adjustable front suspension
* Puncture proof solid tyres
* Drive wheels: 356mm
* Rear wheels: 203mm

Castors
* Check with supplier

Brakes
* Electromagnetic brakes

Controls
* Controller: P G Drives VSI
* Fully programmable control system
* Multi-positional joystick

Batteries
* x2 12v 50ah

Motor
* Check with supplier

Transport or Dismantling
* Check with supplier

Customisation
* Check with supplier

Colours
* Check with supplier

Accessories
* Check with supplier

Considerations

Caution: Load Capacity for Powered Wheelchairs
The load capacity of a powered wheelchair may change according to the type of ground the wheelchair is used on. The supplier stated load capacity may have been given for a powered wheelchair that has been tested on flat ground. However, the powered wheelchair's load capacity, performance and stability may change when the powered wheelchair is used on an incline. These factors, including the maximum gradient on which a powered wheelchair should be safely used, should be discussed with the supplier.

Transport Accessibility
The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.

Wheelchair spaces
All new Sydney buses feature special 'kneeling suspension' and a ramp to provide easy access for less mobile passengers.

There are spaces for two wheelchairs on the new buses. These will accommodate most manual and electric wheelchairs with maximum length 1250mm, maximum width 750mm, maximum turning circle1500mm and maximum weight 200kg.

For safety reasons, passengers in wheelchairs are advised to face the back of the bus, bracing their wheelchair against the side of the space, applying the brakes and securing the seat belt of the wheelchair.

Wheelchair accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Transport Requirements
Occupied Wheelchair in a Car
A person sitting in a wheelchair within a car or van requires certification and RMS (Roads and Maritime Services) approval for the wheelchair and occupants restraint system where the wheelchair or occupant are restrained to the vehicle structure. RMS approval is not required for a postural support, such as a harness, that is only attached to the wheelchair and not to the vehicle.

Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require a Roads and Maritime Services (RMS) approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RMS approval is not required for a postural support, such as a harness that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Contact the supplier or refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+Head+Back+Seats

Place Of Manufacture

Unknown

Price Guide

Contact supplier for pricing information.

Models

Only one model available

Additional Dimensions

Length if footrest fitted.....................1080mm
Overall weight (w/o batteries)..........80kg
Overall height.....................................1240mm
Max speed.........................................6.4km/h
Max slope...........................................8 degrees

Maintenance

All wheelchairs require regular maintenance. Refer to User Manual for specific details

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the State Insurance Regulatory Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.