More Details

Frame
*Front and rear suspension
* See supplier re: cowling colours

Seat
* The seat has a high back and has a lever underneath to allow the seat to swivel into one of four positions.
* Another lever slides the seat back and forth to adjust the distance between the user and the tiller.
* The seat is removable and has four different height adjustment settings.

Armrests
* Armrests are width adjustable and are removable for transportation.

Controls
* Gas adjustable steering tiller (infinitely adjustable to different positions),
* The speed control allows a speed between one (minimum) and 10 km/hr (maximum).
* The left thumb/finger level controls the reverse and the right thumb/finger lever controls the forward motion.

Batteries
* Supplied with maintenance free, sealed lead acid 50 amp batteries. Battery performance can be affected by temperature, terrain, condition of battery, type of battery charger, the weight of the user, wind speed etc. The battery level indicator is only a guide and is most effective when the scooter is moving, only then is the true discharge level displayed.
* When the scooter stops the battery level indicator may indicate full.
* An active user can use up to 30% of battery capacity or more per day.
* Inactive users may only use 50% of battery capacity in a week.
* In both these instances the battery should be put on charge overnight.

Battery Charging
* To charge the batteries connect the 3-pin male plug lead into the 3-pin female battery charging socket located on the battery pack. Plug the A/C cord plug into the wall socket and the other end into the charger (2-pin). Refer to the LED indicator description based on charging status of the charger's manual. Once the batteries are completely charged, unplug the A/C cord from the wall then unplug the 3-pin lead from the battery pack. The battery charger is off-board.

Wheels
* The scooter has 265mm pneumatic wheels with anti tip wheels at the rear.

Freewheeling
* The freewheel release lever (yellow handle) is located inside the right/left rear wheel. To disengage the motor, lift up the lever (the scooter can now be pushed). To re-engage the motor push down the lever.

Upholstery
* Black vinyl seat upholstery is standard.

Brakes
* Electromagnetic brakes are engaged by releasing the controls.

Accessories (included)
* Front shopping basket
* Hazard lights and indicators
* Super bright headlight

Considerations

Transport Accessibility

The space allowed on public transport for carrying mobility equipment is an area of 1300mm by 800mm.
Overall length of this scooter ...........1250mm
Overall width of this scooter ........... 600mm

State transit will only carry scooters with an unladen weight of less than 200 kg and which can be driven onto the bus, and manoeuvred to fit wholly within the designated wheelchair space under their own power. Any such scooters carried must also comply where relevant with the rules applying to wheelchairs.

Three wheeled mobility aids of any kind are unstable in normal bus operations and will not be carried because of the safety risk.

Accessible buses display a blue and white wheelchair sign on the front of the bus, and on the easy access door.

Factors applying to all scooters
* This item should be trialled in the user's own environment to ensure maximum safety and independence. Environmental considerations include eg: kerbs, footpaths, tram and railway crossings, street crossings, etc
* Users should take care when riding a scooter or powered wheelchair and observe the following safety guidelines:
* Users who intend to use scooters or powered wheelchairs must ensure they have the necessary physical and cognitive skills to operate and manoeuvre them safely
* Stay within the legal speed limit of 10km/h
* Be aware that taking medication or driving under the influence of alcohol may affect the user's judgement
* Always make sure that you are clearly visible, particularly at night or on dull days-use the lights and reflectors and install a reflective flag high enough to be seen by motorists
* Wear a bicycle helmet whenever possible
* Slow down when you are near other people, especially pedestrians and cyclists
* Avoid stopping or driving on inclines greater than your scooter is designed for
* Use footpaths if possible. If there are no foot paths, plan to user quieter roads
* Plan your trip and avoid uneven surfaces, dips and potholes
* Ensure if you are carrying parcels that the load will not over-balance your scooter and the parcels do not interfere with your controls or vision

Place Of Manufacture

Taiwan

Price Guide

Price from Mobility Aids (Vic)

Models

Only one model available

Options

* Rear Mirror
* Black Vinyl Captain Seat
* Detachable Basket
* Stick/crutch holder
* Walking frame holder
* Oxygen bottle holder
* Golf bag carrier
* Bag carrier
* Sun canopy
* Tarp cover
* Scooter Mac
* Safety flags

Additional Dimensions

Standard
Height Overall............................From 1220 mm to 1260 mm
Climbing Grade (degrees).......9 degr
Turning Circle............................1440 mm

Maintenance

All electric scooters require regular maintenance. Refer to the User Manual or supplier for specific details.

Standards

Standards
Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see
http://at-aust.org/home/assistive_technology/standards.html

TGA
Many of the items on the Assistive Technology Australia website are categorised as a Medical Device. Medical devices that are approved for use in Australia have been entered into a national database called the Australian Register of Therapeutic Goods (ARTG), which is maintained by the Therapeutic Goods Administration (TGA). You can ask the supplier for the ARTG number for the device you wish to purchase and search the ARTG for the entry. To access information on the ARTG visit www.tga.gov.au

When buying a medical device it is advisable to only choose a medical device that is recommended by a healthcare professional and has been included on the ARTG.

Licence & Insurance Requirements

In NSW, motorised wheelchairs that weigh less than 110 kg and cannot travel at more than 10 km/h do not have to be registered, provided they are being used by a person with mobility problems. A person driving a motorised wheelchair under these circumstances is defined as a pedestrian under the Australian Road Rules and is permitted to travel on a footpath or nature strip adjacent to the road.

Vehicles exempt from registration are covered by the nominal defendant scheme (administered by the State Insurance Regulatory Authority) if they are at fault in an accident in NSW on a road or road-related area and cause injury to another person. However, this cover is only valid in NSW.