subscribers
A wide, heavy duty steel footrest designed to provide extra stability. It is height adjustable and features a 3M Safety Walk slip resistant surface to help prevent the feet from sliding.
An adjustable angled footrest with a plastic platform and slip resistant carpet on the surface. The height is adjusted by spacer blocks, three sets of which are supplied as standard with each footrest and held in place by a recessed butterfly screw. The base has slip resistant rubber feet. One size only.
An adjustable height single legrest with a curved leg support cushion on a gas operated height mechanism and a five star castor base. The cushion pivots to enable some adjustment of the leg support.
A footrest with a vinyl covered foam legrest set at 355mm above the platform. The footrest platform is three setting, height adjustable and can also be tilted to plus or minus 50 degrees.
A polystyrol plastic footrest which is adjustable for height and inclination. Adjustment is manual by turning a large knobbed screw. The footrest is ribbed to provide a slip resistant surface.
A footrest which is constructed from tubular steel with a chrome finish. Lower leg support consists of four pieces of tubing (assembled lengthways) attached to the foot support and the two support legs of the frame (at the foot end) and to a single tube (at the knee end). The frame rests on any household chair, the weight of the user's leg holding the frame in place.
A legrest / foot stool designed for use with any Joyce frame chair. It is foam padded and vinyl covered. It has telescopic legs and adjusts in height to suit the chair seat height.
A chrome frame, with four rubber tipped feet. The top of the footrest is curved, and is foam padded and vinyl covered.
Copyright © 2009 Independent Living Centre NSW.
Site designed by the Human-Computer Interaction Laboratory, School of Computer Science and Engineering, University of New South Wales.