Short Description

An electrically operated, wooden framed, fully upholstered lounge chair with reclining backrest, elevating legrest and stand up function. The wallsaver feature on the one motor model, allows the chair to be positioned just 80mm from the wall. Multi layer foam cushions and two way stretch fabric upholstery provide pressure care. Available with one or two motors, in mini, medium and maxi sizes.

Options

* Head cushion
* Customise seat and back
* 2 motor options
* Head and arm covers
* Heat and massage unit
* Armrest mounted hand control
* Removable armrest
* Recline only version
* Special fabric order
* Mobile Hospital Base with
* Chrome hand rail

Models

The TopForm Luxor Electric Lift and Recline Chair comes in two models

* TopForm Luxor Optima in mini, medium and maxi sizes. This model has a multi layer foam fixed seat cushion
* TopForm Luxor Platinum in mini, medium and maxi sizes. This model has a removable memory foam cushion that can be replaced with a Roho or other pressure care cushion if required

Additional Dimensions

Height 1020, 1070 and 1170mm

More Details

Frame
* Wooden Tasmanian oak hardwood and select pine
* The frame is on four castors to allow ease of movement for cleaning
* Optional mobile Hospital Base and chrome hand rail for transportability

Upholstery
* Combination of pressure management fabric and topsuede denim
* Premium bonded polyester headrest
* Special fabric order if required

Backrest
* Three cushion segmented back configuration. Each segment is individually adjustable to suit individual support needs
* Two x 11 gauge no - sag springs (lumbar and med back)
* two x 50mm elastic webbing (shoulders)
* One x jute webbing (top back)

Seat
* Multi layer seat cushion also for pressure reducing purposes. Available on Mini, Medium and Maxi size chairs

Armrests
Padded and upholstered, with topsuede denim on the front handrest section

Legrest
* Is incorporated in the chair, with a chaise and extends from the edge of the seat when in the raised position
* The legrest elevates to a position level to the seat

Controls
* A hand held, soft touch push button control on an extendable cord is standard
* A fabric loop is attached to the cushion. This is used to hold the control in a convenient position. If the loop is not required, it can be tucked under the cushion
* As an option, the hand control can be recessed into the armrest

Action of the chair
One Motor
* The one motor chair has the WALL SAVER mechanism. This not only allows the chair to be placed close to the wall, but also has the feature that the footrest raises and not until it is fully raised does the back start to recline. This allows the user to remain sitting upright with their legs elevated if desired.)
* The back reclines to about 55 degrees from horizontal

Two Motors
* On the two motor chair the back and footrest are controlled independently, and goes completely flat. If required,the feet can be elevated above the heart

Power
* Mains powered
* Two x 9 volt batteries provide battery backup (this supplies approx four chair adjustments then batteries must be replaced)

Customisation
* Seat width, seat height, back height and back thickness can be customised

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

Tas, Australia