Models And Options

Models

Two models available as follows;
Mini Lift 125 - load capacity of 125kg (Ausmedic product code 68975)
Mini Lift 200 - load capacity of 200kg (Ausmedic product code 72014)

Options

. replacement power cord
. replacement hand controller
. calf strap

Dimensions

Additional Dimensions

Weight (kg) NSW................................... 48 kg
Footrest Width.................................... 390 mm
Footrest Depth.................................... 345 mm
Lift Height (from floor)....................................... From 870 mm to 1435 mm

Additional Info

More Details

MATERIALS: Steel.
FINISH: Textured powder coated.
MAST: Upright mast is made up by the frame of the hoist. Battery attachment onto mast is at the rear under the push handle.
BASE: U-shaped base. Adjustable width of the legs using a battery powered mechanism operated from the hand control.
BOOM: Twin boom is called a lift bar. It is straight and has two looped attachment points for the sling. The boom is adjustable in length using two screw releases. Two rubber gripped handles are attached to the boom for the user to place their hands.
ARC OF LIFT: The rigid lift bar moves in an arced plane from horizontal to vertical.
CASTORS: The hoist has four single swivel castors with the rear two lockable.
PUSH HANDLE: A one piece, horizontal push handle is attached to the rear of the mast.
FOOTPLATE: The removable square foot plate has a slip resistant, rubber ridging finish on a powder coated steel frame.
KNEE PAD: Padded and upholstered knee pad is contoured in shape. Adjustable in depth and height using a screw release. Optional calf strap available.
METHOD OF OPERATION:
Raise and lower - hand held control on extendable cord with rocker switch.
Opening Legs of Base: is also controlled by rocker switch on the hand held control.
POWER SOURCE: The hoist is battery powered. A manually operated mechanism using an allen key is at the rear to lower the hoist if the power mechanism fails.
BATTERY RECHARGING: The battery recharger is separate to the hoist. Remove the battery and take to the recharger at a power point.
PORTABILITY: The foot plate is removable without tools. An allen key is used at four points at the base of the hoist so its top section can be dismantled from the bottom section.
SLINGS: are purchased separately. They are a 2 point nylon band sling with loop attachments. Slings are available with or without arm holds. Slings are available in 4 sizes (small, medium, large or extra large). Slings should be fitted as low as possible - around the hips and lower back rather than the under the arms.
CONTROLS: are hand held on an extendable cord. There is an emergency stop and lower button on the mast.
SAFETY FEATURES: Emergency cut off switch at the rear of the hoist is a red push button.
Supplier states the hoist will perform approximately 15 lifts per battery charge.

Requirements

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Place Of Manufacture

Denmark