Short Description

A range of electrically operated lift / recliner lounge chairs which lower to a fully reclined position. All chairs have a wall saver design and can be positioned as close as 100mm to a rear wall. Castors disengage when lift and recline adjustments are operating. Chairs are available in compact, medium and large sizes with single or twin motors.

Options

* Headrest
* Arm covers available on request
* All chairs can be integrated into a suite
* Dual motor mechanism
* A wide range of fabrics including Crypton waterproof fabrics

Models

The Range Consists of the Following
Moritz XL270
* Very high capacity twin motor electric lift ( lift capacity 270kg seat width 82cm overall width 129cm) This chair is constructed from marine ply and is braced with steel brackets and has 200 grade foam in the seat.

Moritz XL200
* Mid capacity single motor electric lift chair ( lift capacity 200kg seat width 66cm overall width 111cm) Same construction as XL270

Aspen, Brooklyn, Coventry, Erin, Paris, Collette, Spacesaver single motor general use electric lift chairs (lift capacity 125kg). The Spacesaver is the same as the Collette but with a smaller arm.
* Erin Petite electric lift chair single or twin motor ( 7.5cm lower and smaller all round than normal chairs 125kg lift capacity)
* Collette Petite electric lift chair single or twin motor ( 7.5cm lower and smaller than normal chairs 125kg lift capacity)

Aspen, Coventry, Erin, Paris, Collette, Spacesaver Twin motor electric lift chair 125kg lift capacity ( twin motor allows full layout however these are not recommended to be slept in on a regular basis)

Additional Dimensions

Aspen & Brooklyn
Width..................................... 980 mm
Length.................................... 900 mm
Height.................................... 1020 mm

Coventry
Width..................................... 870 mm
Length.................................... 900 mm
Height.................................... 1020 mm

Moritz XL200
Width..................................... 1110 mm

Moritz XL270
Width..................................... 1290 mm

Paris
Width..................................... 940 mm
Length.................................... 900 mm
Height.................................... 1020 mm

Spacesaver
Width..................................... 730 mm
Length.................................... 900 mm
Height.................................... 1020 mm

More Details

* Zero wall proximity - operates 100mm from wall

Frame
* All frames are made from plantation pine and are glued, blocked and nailed

Uphostery
* Suspension is Zig Zag springing
* Premium high resilient foam
* European Dacron back cushions
* Available in leather
* A wide range of fabrics is available. Crypton waterproof fabrics available on request.

Controls
* Controller can be placed either left or right side - right side by default
* Dual motor mechanism available for complete layout operation and independent foot and backrest operation

Motors
* All chairs are available with single motor (Omega 1) or Twin motor full layout with independent control of foot and back (Omega 2)

Footrest
* Integrated.
* Spring loaded footrests for extra safety

Castors
* Mobile on castors for ease of movement. Castors disengage when lift and recline adjustments are operating.

Safety
* Battery backup in case of power failure. It returns chair to home position - must be replaced after one operation
* Spring loaded footrests

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

NSW Australia