Short Description

This economical hydraulically operated Lift has swing landing doors and is suitable for both private residential and commercial (limited mobility) applications. An optional self supporting tower can be installed indoors or outdoors. The Lift capacity is four adults or a wheelchair occupant and a carer. With a low pit and headroom requirement, it is easily incorporated into any new or existing project. Options are available. The lift fully complies with the relevant Australian standards.

Options

. Self supporting tower.
. Wide range of attractive colours and finishes are available
. Various openings include front/single entry, adjacent and thru car configurations
Door Options:
. Panoramic with frame and glass is available, or solid door powder coated to a RAL colour, with over 200 colours available within the standard range.

Models

DomusLift XL
Variations available include the option of a self supporting tower.
Various openings include front / single entry, adjacent and thru car configurations

The XL model has been developed to:
. "fit" car and travel dimensions not available with the conventional DomusLift model
. increase the platform maximum load
. use glass panels on all car walls (except for car sling wall) and for cars with greater dimensions

More Details

Motor:
hydraulically operated

Method of lift operation:
Residential: automatic push button
Commercial: constant pressure hold to run control

Method of door operation:
manual or automatic opening door

Accessibility of control panel within the lift:
wheelchair accessible height

Floors Served and travel:
Residential: Can service up to 6 floors with a travel distance of up 12m
Commercial: Can service a maximum of 4m floor to floor

Stops and openings:
Front / single entry, adjacent and through car configurations

Door Options:
Panoramic with frame and glass is available, or solid door powder coated to a RAL colour, with over 200 colours available within the standard range

Car Safety Features:
In the event of power failure, the lift will lower to the lowest floor to allow passengers to exit. This automatic emergency lowering feature is standard.
Passenger Protection: Non touch infrared doorway beams or full height safety cabin protection cut in.

Height of travel:
12m travel in private residences or 4m travel in commercial / public building applications for disabled access.

Installation

In NSW the owner or controller of the lift (if not the owner) is required to register their lift with WorkCover. They need to complete Form PL2 Application For Item Registration of Lift / Escalator and Moving Walkway. A fee is charged for a lift installed in a public place. The applicant must state that the plant has been inspected by a competent person and is safe to operate (use).

It is compulsory that the lift be inspected annually by a competant person. WorkCover requires payment for registration as well as an annual fee.

Request further details from the supplier or contact WorkCover Plant Registration Unit.

It is an offence to operate plant that is not correctly registered under the Occupational Health and Safety Regulation 2001.

Standards

The following information is from the supplier
This lift meets the requirements of the Australian Lift code AS 1735.18. in private residential applications.

This lift meets the requirements of the Australian Lift code AS 1735.15. for disabled access in commercial applications - for persons with limited mobility.
In this application the following features are included: constant pressure buttons with key isolation switch, brail buttons, handrail, mirror, full height safety cabin protection, automatic door openers, control panels and hands free in car telephone.

Relevant Australian Standards for this Category
AS 1735 Part 18 1998
AS 1735 Part 15

Place Of Manufacture

IGV - Italy.