Short Description

A hydraulically powered, internal hoist, designed to lift a person seated in a powered or manual wheelchair or scooter into and out of a van or bus. Mounts to the side or rear door of the vehicle. The unique stacking platform stows below window level, allowing clear site lines while in transit.

Options

Door Operators
Optional automatic door operators. The doors can be opened and closed with all standard and optional lift controls.

Models

Only one model available

Additional Dimensions

Minimum door width required 1016mm
Minimum door height required unavailable*
Weight 148kg (average)

* made for American full size vans (side or rear doors)

More Details

SAFETY
Outboard Roll Stop
The spring loaded roll stop raises to the vertical position before the platform leaves the ground.

Threshold Warning Plate
If the threshold warning plate is occupied when the lift platform is below vehicle floor level, lift operation will be prevented, and visual / audible warnings will alert passengers and attendants to unsafe conditions.

CONTROLS
Hand Held Control
The standard hand held control features buttons with illuminated functions. An optional remote control system is available.

Switch Arm
The lift's switch arm features an up/down control, allowing the wheelchair user to control the lift while on the platform.

LIFT ARMS
The dual hydraulic lift arms have a lifting capacity of up to 272kg.

HYDRAULIC POWER PACK
The compact hydraulic power pack features on-lift controls operating every function of the lift. A manual back up pump allows the lift to be operated in the event of vehicle electrical failure.

OPERATION
The Braun Vista Series lifts are fully hydraulic in operation, for both the fold / unfold and up / down cycles. Lift operation is controlled by the standard hand-held control, the on-lift controls, or the optional remote control.

Installation

The Vista Series is designed for installation in the side or rear doors of domestic full size vans. Each lift features Braun's Quiet Ride? system to ensure the quietest possible riding environment.

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For more information about standards also see www.ilcaustralia.org.au/Using_Assistive_Technology/standards_regulation

Place Of Manufacture

Braun Corporation (USA)