Models And Options

Options

* Seat backrest
* Cane / crutch holder
* Oxygen bottle holder
* Extra bag
* Serving tray
* Direction lock
* Roll resistors
* Skis / obstacle climbers

Models

Only one model is available

Dimensions

Additional Info

More Details

Material
T-6061 aluminium frame and fibre reinforced plastic. Available in various colours (plastic parts)

Seat
Solid lift up seat with textured surface and two insets for cups (may not be deep enough to carry a cup of liquid with stability) while pushing the frame. Rounded edges prevent seat from cutting into user's legs. A lightweight cloth bag with handles is located under the seat. The bag is now made of fabric can cannot be seen through.

Handles
The handles are adjustable in 6 increments between 820mm and 980mm.
Adjustment points are numbered to facilitate correct height selection. The hand grips are moulded rubber with reflectors at the ends

Front Wheels
Large swivelling 250mm front wheels with solid tyres. A swivel lock is optional.

Rear Wheels
200mm rear wheels. Optional roll resistors provide variable resistance on these wheels, preventing free rolling. This may be a useful feature for people who lack confidence when using the walker.

Stepper Pad
Located inside the rear wheels. Press down on the stepper pad with your foot and pull back on the handles at the same time to lift the front wheels to negotiate a kerb or small step.

Adjustments
* Handle height adjustment - pull the Handle Height Adjuster tab out while repositioning the handle. Once the correct height has been selected, release the Adjuster and push the handle down until it locks into position.
* Seat height adjustment - pull both Seat Height Adjuster handles while repositioning the seat. Release both adjusters to lock the seat in position. Push down on the seat to ensure that both sides are firmly locked into position before sitting.

Brakes
The brake cables are protected and hidden safely away inside the walker frame. The brakes retain correct adjustment regardless of the position of the handles. Any necessary adjustment is done with a allen key.

Folding
To fold - pull up the folding lever to its locked position.
To unfold - reverse the procedure

Safety
In built red reflectors in the handles and reflective tape on the frame

Cleaning
Detergent or high pressure wash

Requirements

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Place Of Manufacture

Nordic Rehab (Sweden)