Short Description

A fixed ceiling hoist with a battery powered vertical and horizontal movement using a hand held control. It remains fixed to overhead tracking. A padded two point spreader bar is standard. A four point tilting frame spreader bar is optional. Various options are available including various tracking options.

Options

Various two point and four point slings available.
Tilting frame spreader bar.
Single, parallel, straight, curved and room covering style tracking. The tracking can be made at various heights from the roof.
Stretcher frame
Gantry system
Automatic return to charge function initiated by user
Infrared remote control
Weighing scales

Models

Also available is the Arjo Maxi Sky 400 - a portable ceiling hoist with battery powered vertical movement

Additional Dimensions

Height NSW........................................ 180 mm
Width NSW......................................... 400 mm
Depth..................................... 240 mm
Length of Strap................................... 2300 mm

More Details

HOIST UNIT
The hoist unit has plastic casing (fire retardant)

BATTERY
Battery Powered
2 x 5 amp/hr will average 150 cycles (loaded at 75kg)
Low battery indicator (audible and visual LED)
Clip on charger anywhere on track

SPREADER BAR
The padded spreader bar extends from the hoist unit from a webbing strap, and is able to rotate separately to the strap.
Two hooked points for sling loop attachments on the standard spreader bar.
Webbing strap can be programmed to alter the distance it can raise and lower.
Wide spreader bar can spread the positioning of the sling so the occupant may be less confined.
Dynamic Positioning System: An optional tilting frame four point spreader bar is optional to fit at four points with keyhole attachment points. The user is supported in a normal anatomical position and can be supported in an upright or semi reclined position.
A stretcher frame is available.

CONTROLS
Hand held push button control on an extendible cord.
Four push buttons indicate the direction of movement, and one push button is used to automatically return the hoist to the charging position.
Speed of vertical and horizontal movement can be programmed.
The hand held control is a narrow, rectangular shape with a hook at the end.
Power on indicator
Charging indicators

TRACKING
A gantry system is available with this hoist.
Turntables within the tracking are available to allow the hoist to move in more than two directions.
Various tracking options are available to change directions or traverse the entire room.
An exchanger option can allow the hoist to transfer between tracking.

POWER AND CHARGING
Inbuilt battery charger that charges when the hoist is parked at one point on the tracking.
A button on the hand control automatically sends the hoist to its point to recharge.

SAFETY FEATURES
Manually operated emergency lowering device.
Emergency stopping feature in case of mechanical failure.
Electrical up and down emergency buttons.
A pull cord is used to stop the hoist in an emergency.

Standards

Specific Australian Standards or other Standard(s) may be applicable for materials, manufacturing processes, or installation of some types of equipment. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specific Standards. Purchasers are advised to check with the supplier or manufacturer of this item as to its compliance with relevant Standard(s).

Standards
CE marked / ISO 10535 compliant

Place Of Manufacture

Arjo International AG (Switzerland)