Short Description

A self propelled manual wheelchair with a chrome molly steel frame. It has removable desk style armrests and swing away, removable legrests with lift up footplates. The rear wheels are quick release. Available in 410 and 460mm seat widths. A deluxe model has carbon fibre wheels.

Models

* Goffa YL303C-16 - 16" (410mm) seat width
* Goffa YL303C-18 - 18" (460mm) seat width

Deluxe models with carbon fibre wheels

More Details

Frame
Folding chrome molly steel frame. Single crossbrace
The wheelchairs have two tipping levers at the rear. Width 685 mm. Height 930 mm. Length 785 mm.

Upholstery
Synthetic

Seat
Standard: Slung style. Seat Front Height 430 or 495 mm.

Backrest
Slung style. Push handles.

Armrests
Desk length with waterfall style front ends. Lift up (swing back). Firm foam padding. Skirtguards.

Legrests
Swing away and removable. Length adjustable. Calf strap

Footplates
Standard: Two piece lift up plastic footplates.

Wheels
610mm wheels with pneumatic tyres. Multi axles adjustable - vertically / horizontally

Castors
Standard: 200mm PU castors

Brakes
Standard: Toggle style operated with a lever

Maintenance
All wheelchairs require regular maintenance. Refer to User Manual for instructions.

Factors To Consider

Wheelchair Restraints
When transporting a person in a wheelchair in a car or van, both the occupant and the wheelchair require an RTA approved restraint system. The wheelchair and the occupant need to be separately secured to the vehicle itself.
RTA approval is not required for a postural support, such as a harness, that supports the user in the wheelchair but is not part of the vehicle restraint system.
The use of a headrest is not legally required but strongly recommended. Easily detachable, folding headrests which fit a wheelchair with standard push handles are available. Refer to section Wheelchair, Scooter, Cushions, ramps / Postural Supports - Seating System: Restraint+ Head+Back+Seats

Standards

For some types of equipment, specific Australian or other Standards are applicable to the materials used in, and the manufacturing processes applied to products. Compliance with relevant Standards is indicated by written certification that a product has been tested and assessed as compliant with specified Standards. Purchasers are advised to check with the supplier or manufacturer of an item as to its compliance with the relevant Standard(s)

Place Of Manufacture

Taiwan