Models And Options

Models

One model is available - B819687

Dimensions

Additional Info

More Details

* Shower seat can be folded up against the wall when not in use. The spring at the top of baseplate locks seat into upright position until released by pulling the top of seat away from wall
* Support system with guide bracket allows varying mounting heights and leaves floor clear for easier cleaning
* Bobrick shower seats, when properly installed, have sufficient strength to sustain more than 113 kg of force (1112 N)

Materials
* One piece, 1/2" (13mm) thick, solidly fused plastic laminate with matte finish melamine surfaces, ivory coloured face sheets, and black phenolic-resin core that are integrally bonded - cannot delaminate
* Nonporous solid phenolic seat has holes to permit water to drain, does not splinter or require oiling, and will not support growth of bacteria
* Slotless round-head carriage bolts and acorn nuts provide additional safety to user.

Setup And Maintenance

Installation

. Installation requirements - must be secured appropriately to studs or into wall. Must withstand a force of 1100 N. Installation must comply with AS 1428.1.

Requirements

Place Of Manufacture

United States of America

Standards

Some assistive technology needs to meet Australian or other standards. Standards may relate to materials, manufacturing and installation. Products that meet Australian or international standards will have written certification. To find out if a product meets Australian Standards ask the supplier to show you the certificate. For a fact sheet about standards contact us or visit www.ilcaustralia.org/home/standards.asp

Shower seats in public buildings:
must comply with AS 1428.1 - "Design for access and mobility - Part 1: General requirements for access - new building work".

A width of 960 -1100mm is required, and depth of 390 - 400mm to comply with AS1428.1.

The fastenings, materials and construction of the seat must be able to withstand a force of 1100 N to comply with AS1428.1.